DGIHN-K-LO
DGIHN-K 125 LO
Hydraulic-rod ends with pressed spherical plain bearing, female thread, with slot and clambing arrangement, according to DIN 24338, maintenance required
Measurements
| d (Bore) | 125 mm |
|---|---|
| d₂ (Head ø) | 260 mm |
| l₄ | 405 mm |
| Thread (g) | M 100 x 3 |
| B (Width) | 125 mm |
| C₁ | 102 mm |
| d₁ | 138 mm |
| d₄ | 135 mm |
| d5 mm | 200 mm |
| dₖ | 180 mm |
| h₁ | 260 mm |
| l₃ | 113 mm |
| l₇ | 120 mm |
| α (Tilt) | 4 |
| Weight | 43 kg |
| C (Dynamic) | 760 kN |
| C₀ (Static) | 1144 kN |
| Radial clearance | 8 - 165 |
| c2 mm | 72 mm |
Details
Special characteristics:
- Used for alternating radial loads;
- Rod ends from size 16 can be greased subsequently by means of a conical grease nipple.
- Female thread with slot, clamping arrangement.
- Hydraulic rod ends are fixed as standard with maintenance required DGE_LO (with extended inner ring) radial-spherical-plain bearings and fixed with retaining rings.
For shaft diameters from 12 mm to 125 mm. Left-hand thread only on request.