DGIHR-DO
DGIHR 20 DO
Hydraulic-rod ends with pressed spherical-plain bearing, female thread, maintenance required
Measurements
| d (Bore) | 20 mm |
|---|---|
| Thread (g) | M 16 x 1,5 |
| d₂ (Head ø) | 56 mm |
| l₄ | 80 mm |
| B (Width) | 16 mm |
| C₁ | 19 mm |
| d₁ | 24.1 mm |
| d₄ | 25 mm |
| d5 mm | 46 mm |
| dₖ | 29 mm |
| h₁ | 50 mm |
| l₃ | 17 mm |
| l₇ | 25 mm |
| α (Tilt) | 9 |
| Weight | 0.43 kg |
| C (Dynamic) | 23.8 kN |
| C₀ (Static) | 57.6 kN |
| Radial clearance | 8 - 100 |
Details
Special characteristics:
- Used for alternating radial loads;
- Used for minimum linkage distances with maximum stroke utilisation.
- All rod ends can be greased subsequently by means of a conical grease nipple.
- Hydraulic rod ends are fixed as standard with maintenance required DGE_ES radial-spherical-plain bearings and fixed with retaining rings. On request, the rod ends may be combined with the following maintenance-required or maintenance-free spherical-plain bearings:
- maintenance required: DGE_ES-2RS; DGEG_ES; DGEG_ES-2RS; DGE_LO; DGE_HO-2RS;
- maintenance-free: GLE; GLE NIRO; GLG; DGE_UK; DGE_UK-2RS; DGE_FW; DGE_FW-2RS
For shaft diameters from 20 mm to 120 mm. Left-hand thread only on request.