DGIHR-K-DO
DGIHL-K 35 DO
Hydraulic-rod ends with pressed spherical plain bearing, female thread, with slot and clambing arrangement, maintenance required
Measurements
| d (Bore) | 35 mm |
|---|---|
| d₂ (Head ø) | 78 mm |
| l₄ | 112 mm |
| Thread (g) | M 28 x 1,5 |
| B (Width) | 25 mm |
| C₁ | 30 mm |
| d₁ | 39.7 mm |
| d₄ | 40 mm |
| d5 mm | 66 mm |
| dₖ | 47 mm |
| h₁ | 70 mm |
| l₃ | 29 mm |
| l₇ | 38 mm |
| α (Tilt) | 6 |
| Weight | 1.2 kg |
| C (Dynamic) | 64 kN |
| C₀ (Static) | 122.4 kN |
| Radial clearance | 8 - 100 |
| c2 mm | 28 mm |
Details
Special characteristics:
- Used for alternating radial loads;
- Used for minimum linkage distances with maximum stroke utilisation.
- All rod ends can be greased subsequently by means of a conical grease nipple.
- Female thread with slot, clamping arrangement.
- Hydraulic rod ends are fixed as standard with maintenance required DGE_ES radial-spherical-plain bearings and fixed with retaining rings. On request, the rod ends may be combined with the following maintenance-required or maintenance-free spherical-plain bearings:
- maintenance required: DGE_ES-2RS, DGE_LO; DGE_HO-2RS; DGEG_ES(-2RS);
- maintenance-free: GLE; GLG; DGE_UK(-2RS); DGE_FW(2RS)
For shaft diameters from 20 mm to 120 mm. Left-hand thread only on request.