DGAR-UK-2RS
DGAR 70 UK-2RS
Rod ends with pressed spherical-plain bearing, steel/PTFE, series E, male thread, with -2RS lip seals on both sides, according to DIN ISO 12240-4, maintenance free
Measurements
| d (Bore) | 70 mm |
|---|---|
| d₂ (Head ø) | 160 mm |
| Thread (g) | M 56 x 4 |
| B (Width) | 49 mm |
| C₁ | 42 mm |
| d₁ | 77 mm |
| dₖ | 92 mm |
| h | 235 mm |
| l₁ | 125 mm |
| l₂ | 315 mm |
| l₇ | 87 mm |
| α (Tilt) | 6 |
| Weight | 8.2 kg |
| C (Dynamic) | 221.3 kN |
| C₀ (Static) | 488 kN |
| Radial clearance | 0 - 72 |
Details
Special characteristics:
- Suitable for use with unilaterally acting loads;
- Rod end housings of forged and heat-treated steel, protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_UK-2RSradial-spherical-plain bearing.
- Sliding combination: heat-treated steel with bonded PTFE - fabric;
- Joint ball of ball bearing steel, hardened, ground, polished and with hard-chrome plated running surface, giving effective protection against corrosion;
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.