DGIR-UK-2RS
DGIL 60 UK-2RS
Rod ends with pressed spherical-plain bearing, steel/PTFE, series E, female thread, with -2RS lip seals on both sides, according to DIN ISO 12240-4, maintenance free
Measurements
| d (Bore) | 60 mm |
|---|---|
| d₂ (Head ø) | 135 mm |
| l₄ | 175 mm |
| Thread (g) | M 52 x 3 |
| B (Width) | 44 mm |
| C₁ | 38 mm |
| d₁ | 66 mm |
| d₃ | 70 mm |
| d₄ | 88 mm |
| dₖ | 80 mm |
| h₁ | 175 mm |
| l₃ | 70 mm |
| l₇ | 75 mm |
| α (Tilt) | 6 |
| Weight | 5.5 kg |
| C (Dynamic) | 185.3 kN |
| C₀ (Static) | 360 kN |
| Radial clearance | 0 - 60 |
| W (A/F) | 75 mm |
Details
Special characteristics:
- Suitable for use with unilaterally acting loads;
- Rod end housings of forged and heat-treated steel, protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_UK-2RS radial-spherical-plain bearing.
- Sliding combination: heat-treated steel with bonded PTFE - fabric;
- Joint ball of ball bearing steel, hardened, ground, polished and with hard-chrome plated running surface, giving effective protection against corrosion;
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.