DGIR-UK-2RS
DGIR 35 UK-2RS
DGIR 35 UK-2RS
Rod ends with pressed spherical-plain bearing, steel/PTFE, series E, female thread, with -2RS lip seals on both sides, according to DIN ISO 12240-4, maintenance free
Measurements
| d (Bore) | 35 mm |
|---|---|
| d₂ (Head ø) | 82 mm |
| l₄ | 166 mm |
| Thread (g) | M 36 x 3 |
| B (Width) | 25 mm |
| C₁ | 21 mm |
| d₁ | 39 mm |
| d₃ | 47 mm |
| d₄ | 58 mm |
| dₖ | 47 mm |
| h₁ | 125 mm |
| l₃ | 60 mm |
| l₇ | 42 mm |
| α (Tilt) | 6 |
| Weight | 1.3 kg |
| C (Dynamic) | 60.3 kN |
| C₀ (Static) | 116.8 kN |
| Radial clearance | 0 - 50 |
| W (A/F) | 50 mm |
Details
Special characteristics:
- Suitable for use with unilaterally acting loads;
- Rod end housings of forged and heat-treated steel, protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_UK-2RS radial-spherical-plain bearing.
- Sliding combination: heat-treated steel with bonded PTFE - fabric;
- Joint ball of ball bearing steel, hardened, ground, polished and with hard-chrome plated running surface, giving effective protection against corrosion;
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.