DGIR-UK
DGIR 15 UK
Rod ends with pressed spherical-plain bearing, steel/PTFE, series E, female thread, according to DIN ISO 12240-4, maintenance free
Measurements
| d (Bore) | 15 mm |
|---|---|
| d₂ (Head ø) | 40 mm |
| l₄ | 81 mm |
| Thread (g) | M 14 |
| B (Width) | 12 mm |
| C₁ | 10 mm |
| d₁ | 18 mm |
| d₃ | 21 mm |
| d₄ | 26 mm |
| dₖ | 22 mm |
| h₁ | 61 mm |
| l₃ | 30 mm |
| l₇ | 20 mm |
| α (Tilt) | 8 |
| Weight | 0.18 kg |
| C (Dynamic) | 11.2 kN |
| C₀ (Static) | 28.8 kN |
| Radial clearance | 0 - 40 |
| W (A/F) | 22 mm |
Details
Special characteristics:
- Suitable for use with unilaterally acting loads;
- Rod end housings of forged and heat-treated steel, protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_UK radial-spherical-plain bearing.
- Sliding combination: heat-treated steel lined with bronze - PTFE - composite;
- Joint ball of ball bearing steel, hardened, ground, polished and, up to size 12, with hard-chrome plated running surface, giving effective protection against corrosion;