BEFN
BEFN 05 - 20 - 502
Rod ends with pressed spherical-plain bearing, female thread, series K, DIN ISO 12240-4 & 8139, maintenance required
Measurements
| d (Bore) | 5 mm |
|---|---|
| d₂ (Head ø) | 18 mm |
| l₄ | 36 mm |
| Thread (g) | M 5 |
| B (Width) | 8 mm |
| C₁ | 6 mm |
| d₁ | 7.7 mm |
| d₃ | 9 mm |
| d₄ | 11 mm |
| dₖ | 11.06 mm |
| h₁ | 27 mm |
| l₃ | 10 mm |
| l₅ | 4 mm |
| l₇ | 10 mm |
| α (Tilt) | 13 |
| Weight | 0.016 kg |
| C (Dynamic) | 2.4 kN |
| C₀ (Static) | 6 kN |
| Radial clearance | 20 - 60 |
| W (A/F) | 9 mm |
Details
Special characteristics:
- Primary application in situations of alternating stresses or impact loads and preferred in situations of large swivelling movements;
- Joint ball made of ball bearing steel, hardened, ground, polished and hard chromium plated, ensures a reliable corrosion protection.
- Rod ends are pressed as standard with DG_PB radial-spherical-plain bearing.
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Rod ends from size 5-30 can be greased subsequently by means of a funnel-type lubrication nipple. Further special grease nipples available on request.
- Connection dimensions in accordance with DIN ISO 8139 for pneumatic cylinders.