DSA-ES-2RS
DSAL 20 ES-2RS
DSAL 20 ES
Rod ends with pressed spherical-plain bearing, with -2RS lip seals on both sides, male thread, series E, according to DIN ISO 12240-4, maintenance required
Measurements
| d (Bore) | 20 mm |
|---|---|
| d₂ (Head ø) | 53 mm |
| Thread (g) | M 20 x 1,5 |
| B (Width) | 16 mm |
| C₁ | 13 mm |
| d₁ | 24 mm |
| dₖ | 29 mm |
| h | 78 mm |
| l₁ | 43 mm |
| l₂ | 104.5 mm |
| l₇ | 27 mm |
| α (Tilt) | 9 |
| Weight | 0.31 kg |
| C (Dynamic) | 20.4 kN |
| C₀ (Static) | 48 kN |
| Radial clearance | 8 - 82 |
Details
Special characteristics:
- Suitable for use with high alternating loads;
- Rod end housings of forged and heat-treated steel, protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_ES-2RS radial-spherical-plain bearing.
- Rod ends from size 15 can be greased subsequently by means of a funnel-type lubrication nipple, and from size 20 by means of a conical grease nipple.
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.