DSA-ES
DSAL 10 E
Rod ends with pressed spherical-plain bearing, male thread, series E, according to DIN ISO 12240-4, maintenance required
Measurements
| d (Bore) | 10 mm |
|---|---|
| d₂ (Head ø) | 29 mm |
| Thread (g) | M 10 |
| B (Width) | 9 mm |
| C₁ | 7 mm |
| d₁ | 13 mm |
| dₖ | 16 mm |
| h | 48 mm |
| l₁ | 26 mm |
| l₂ | 62.5 mm |
| l₇ | 15 mm |
| α (Tilt) | 12 |
| Weight | 0.051 kg |
| C (Dynamic) | 5.2 kN |
| C₀ (Static) | 14.1 kN |
| Radial clearance | 8 - 68 |
Details
Special characteristics:
- Suitable for use with high alternating loads;
- Rod end housings of forged and heat-treated steel, protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_E (from size 6-12) and DGE_ES (from size 15-80) radial-spherical-plain bearing.
- Rod ends from size 15 can be greased subsequently by means of a funnel-type lubrication nipple, and from size 20 by means of a conical grease nipple.