DSI-ES-2RS
DSIL 80 ES-2RS
DSIL 80 ES
Rod ends with pressed spherical-plain bearing, with -2RS lip seals on both sides, female thread, series E, according to DIN ISO 12240-4, maintenance required
Measurements
| d (Bore) | 80 mm |
|---|---|
| d₂ (Head ø) | 180 mm |
| l₄ | 320 mm |
| Thread (g) | M 64 x 4 |
| B (Width) | 55 mm |
| C₁ | 47 mm |
| d₁ | 89 mm |
| d₃ | 95 mm |
| d₄ | 110 mm |
| dₖ | 105 mm |
| h₁ | 230 mm |
| l₃ | 85 mm |
| l₇ | 100 mm |
| α (Tilt) | 6 |
| Weight | 12 kg |
| C (Dynamic) | 287.6 kN |
| C₀ (Static) | 600 kN |
| Radial clearance | 8 - 142 |
| W (A/F) | 100 mm |
Details
Special characteristics:
- Suitable for use with high alternating loads;
- Rod end housings of forged and heat-treated steel, protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_ES-2RS radial-spherical-plain bearing.
- Rod ends from size 15 can be greased subsequently by means of a funnel-type lubrication nipple, and from size 20 by means of a conical grease nipple.
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.