EMN
EMN 06 - 20 - 501
Rod ends with pressed spherical-plain bearing, male thread, series E/EH, DIN ISO 12240-4, maintenance required
Measurements
| d (Bore) | 6 mm |
|---|---|
| d₂ (Head ø) | 20 mm |
| Thread (g) | M 6 |
| B (Width) | 6 mm |
| C₁ | 4 mm |
| d₁ | 8 mm |
| dₖ | 10 mm |
| h | 36 mm |
| l₁ | 22 mm |
| l₂ | 46 mm |
| l₇ | 11 mm |
| α (Tilt) | 13 |
| Weight | 0.017 kg |
| C (Dynamic) | 2.5 kN |
| C₀ (Static) | 8.5 kN |
| Radial clearance | 32 - 68 |
Details
Special characteristics:
- Primary application in situations of alternating stresses or impact loads and preferred in situations of large swivelling movements;
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_E (from size 6-12) or DGE_ES (from size 15-70) radial-spherical-plain bearing.
- Rod ends from size 15 can be greased subsequently by means of a funnel-type lubrication nipple, and from size 20 by means of a conical grease nipple. Further special grease nipples available on request;