BRF
BRF 12 - 01 - 502
Rod ends with ball bearing, female thread, series K, DIN ISO 12240-4 & 8139, low maintenance, lubrication possible
Measurements
| d (Bore) | 12 mm |
|---|---|
| d₂ (Head ø) | 32 mm |
| l₄ | 66 mm |
| Thread (g) | M 12 x 1,25 |
| B (Width) | 16 mm |
| C₁ | 12 mm |
| d₁ | 14.6 mm |
| d₃ | 17.5 mm |
| d₄ | 22 mm |
| h₁ | 50 mm |
| l₃ | 22 mm |
| l₅ | 6.5 mm |
| l₇ | 16 mm |
| α (Tilt) | 7.5 |
| Weight | 0.107 kg |
| C (Dynamic) | 5 kN |
| C₀ (Static) | 1.8 kN |
| Radial clearance | 10 - 30 |
| n max | 1125 rpm |
| Y (Axial) | 1.74 |
| Y₀ (Axial) | 1.82 |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- Low bearing friction,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be subsequently lubricated by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.
- Connection dimensions in accordance with DIN ISO 8139 for pneumatic cylinders.