BRM Zoll
BRM 3/8 - 00 - 501
Rod ends with ball bearing, male thread, dimensions in inches, low maintenance, lubrication possible
Measurements
| Thread (g) | 3/8 - 24 UNF |
|---|---|
| d (Bore) | 0.375" |
| d₂ (Head ø) | 1.102" |
| B (Width) | 0.551" |
| C₁ | 0.413" |
| d₁ | 0.468" |
| h | 1.909" |
| l₁ | 1.141" |
| l₂ | 2.46" |
| l₇ | 0.748" |
| α (Tilt) | 8 |
| Weight | 0.06 kg |
| C (Dynamic) | 4.4 kN |
| C₀ (Static) | 1.4 kN |
| Radial clearance | 10 - 30 |
| n max | 1225 rpm |
| Y (Axial) | 1.87 |
| Y₀ (Axial) | 1.83 |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- Low bearing friction,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be subsequently lubricated by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.