BRM Zoll
BRM 5/8 - 00 - 502
Rod ends with ball bearing, male thread, dimensions in inches, low maintenance, lubrication possible
Measurements
| Thread (g) | 5/8 - 18 UNF |
|---|---|
| d (Bore) | 0.625" |
| d₂ (Head ø) | 1.653" |
| B (Width) | 0.826" |
| C₁ | 0.59" |
| d₁ | 0.744" |
| h | 2.618" |
| l₁ | 1.574" |
| l₂ | 3.444" |
| l₇ | 0.944" |
| α (Tilt) | 8 |
| Weight | 0.2 kg |
| C (Dynamic) | 6.3 kN |
| C₀ (Static) | 2.4 kN |
| Radial clearance | 10 - 30 |
| n max | 975 rpm |
| Y (Axial) | 2.24 |
| Y₀ (Axial) | 2.35 |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- Low bearing friction,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be subsequently lubricated by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.