BRTF NIRO VR
BRTF 10 - 90 - 502
Rod ends in stainless steel with roller bearing, full complement design, female thread, series K, DIN ISO 12240-4 & 8139, low maintenance, lubrication possible
Measurements
| d (Bore) | 10 mm |
|---|---|
| d₂ (Head ø) | 28 mm |
| l₄ | 57 mm |
| Thread (g) | M 10 |
| B (Width) | 14 mm |
| C₁ | 10.5 mm |
| d₁ | 12.7 mm |
| d₃ | 15 mm |
| d₄ | 19 mm |
| h₁ | 43 mm |
| l₃ | 20 mm |
| l₅ | 6.5 mm |
| l₇ | 15 mm |
| α (Tilt) | 8 |
| Weight | 0.076 kg |
| C (Dynamic) | 7.98 kN |
| C₀ (Static) | 4.55 kN |
| Radial clearance | 10 - 30 |
| W (A/F) | 17 mm |
| n max | 820 rpm |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements. In contract to the cage design, the full complement design is suitable for higher loads but with a lower speed threshold.
- High loads,
- Mainly all rod end housings are made of forged stainless steel, extremly high loads resistant and surface electropolished which ensures you a very high corrosion resistance.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs in stainless steel on both sides to prevent the penetration of coarse dirt particles inside the bearing.
- Connection dimensions in accordance with DIN ISO 8139 for pneumatic cylinders.