BRTF
BRTF 35 - 00 - 502
Rod ends with roller bearing, cage design, female thread, series K, DIN ISO 12240-4 & 8139, low maintenance, lubrication possible
Measurements
| d (Bore) | 35 mm |
|---|---|
| d₂ (Head ø) | 90 mm |
| l₄ | 182 mm |
| Thread (g) | M 36 x 3 |
| B (Width) | 48 mm |
| C₁ | 35 mm |
| d₁ | 44.5 mm |
| d₃ | 51 mm |
| d₄ | 65 mm |
| h₁ | 137 mm |
| l₃ | 70 mm |
| l₅ | 20 mm |
| l₇ | 48 mm |
| α (Tilt) | 7 |
| Weight | 2.25 kg |
| C (Dynamic) | 50.1 kN |
| C₀ (Static) | 37 kN |
| Radial clearance | 10 - 30 |
| W (A/F) | 50 mm |
| n max | 400 rpm |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- High loads,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.
- Connection dimensions in accordance with DIN ISO 8139 for pneumatic cylinders.