BRTF
BRTF 40 - 00 - 501
Rod ends with roller bearing, cage design, female thread, series K, DIN ISO 12240-4 & 8139, low maintenance, lubrication possible
Measurements
| d (Bore) | 40 mm |
|---|---|
| d₂ (Head ø) | 120 mm |
| l₄ | 230 mm |
| Thread (g) | M 42 x 3 |
| B (Width) | 66 mm |
| C₁ | 49 mm |
| d₁ | 60 mm |
| d₃ | 58 mm |
| d₄ | 70 mm |
| h₁ | 170 mm |
| l₃ | 80 mm |
| l₅ | 22 mm |
| l₇ | 70 mm |
| α (Tilt) | 7 |
| Weight | 4.65 kg |
| C (Dynamic) | 104.9 kN |
| C₀ (Static) | 79.2 kN |
| Radial clearance | 10 - 30 |
| W (A/F) | 60 mm |
| n max | 360 rpm |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- High loads,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.
- Connection dimensions in accordance with DIN ISO 8139 for pneumatic cylinders.