BRTM VR
BRTM 18 - 30 - 502
Rod ends with roller bearing, full comlement design, male thread, series K, DIN ISO 12240-4, low maintenance, lubrication possible
Measurements
| d (Bore) | 18 mm |
|---|---|
| d₂ (Head ø) | 46 mm |
| Thread (g) | M 18 x 1,5 |
| Radial clearance | 10 - 30 |
| B (Width) | 23 mm |
| C₁ | 16.5 mm |
| d₁ | 21.9 mm |
| h | 72 mm |
| l₁ | 44 mm |
| l₂ | 95 mm |
| l₇ | 25 mm |
| α (Tilt) | 8.5 |
| Weight | 0.28 kg |
| C (Dynamic) | 18.5 kN |
| C₀ (Static) | 12.9 kN |
| n max | 600 rpm |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements, In contract to the cage design, the full complement design is suitable for higher loads but with a lower speed threshold.
- High loads,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.