BRTM VR
BRTM 35 - 30 - 502
Rod ends with roller bearing, full comlement design, male thread, series K, DIN ISO 12240-4, low maintenance, lubrication possible
Measurements
| d (Bore) | 35 mm |
|---|---|
| d₂ (Head ø) | 92 mm |
| Thread (g) | M 36 x 3 |
| Radial clearance | 10 - 30 |
| B (Width) | 48 mm |
| C₁ | 35 mm |
| d₁ | 44.5 mm |
| h | 137 mm |
| l₁ | 82 mm |
| l₂ | 183 mm |
| l₇ | 48 mm |
| α (Tilt) | 7 |
| Weight | 2.05 kg |
| C (Dynamic) | 63.2 kN |
| C₀ (Static) | 50.5 kN |
| n max | 267 rpm |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements, In contract to the cage design, the full complement design is suitable for higher loads but with a lower speed threshold.
- High loads,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.