BRTM Zoll
BRTM 3/4 - 00 - 502
Rod ends with roller bearing, cage design, male thread, dimensions in inches, low maintenance, lubrication possible
Measurements
| Thread (g) | 3/4 - 16 UNF |
|---|---|
| d (Bore) | 0.75" |
| d₂ (Head ø) | 1.968" |
| B (Width) | 0.984" |
| C₁ | 0.708" |
| d₁ | 0.956" |
| h | 3.09" |
| l₁ | 1.85" |
| l₂ | 4.074" |
| l₇ | 1.102" |
| α (Tilt) | 7 |
| Weight | 0.341 kg |
| C (Dynamic) | 16.7 kN |
| C₀ (Static) | 11.5 kN |
| Radial clearance | 10 - 30 |
| n max | 825 rpm |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- High loads,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.