PM
PM 06 - 00 - 502
Rod ends with ball bearing, male thread, low maintenance, lubrication possible
Measurements
| d (Bore) | 6 mm |
|---|---|
| d₂ (Head ø) | 24 mm |
| Thread (g) | M 10 x 1 |
| B (Width) | 14 mm |
| C₁ | 10 mm |
| d₁ | 8.5 mm |
| d₃ | 14 mm |
| h | 64 mm |
| l₁ | 42.5 mm |
| l₂ | 77.5 mm |
| l₇ | 17 mm |
| α (Tilt) | 10.5 |
| Weight | 0.062 kg |
| C (Dynamic) | 2.5 kN |
| C₀ (Static) | 0.8 kN |
| Radial clearance | 10 - 30 |
| n max | 1300 rpm |
| Y (Axial) | 1.28 |
| Y₀ (Axial) | 1.34 |
| e mm | 1.5 mm |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- Low bearing friction,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel-type lubrication nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.
- In standard length with designation PM _-00-501/-502. In shorter form with designation PM _-01-501/-502.