DGEG-ES-2RS
DGEG 25 ES-2RS
Spherical-plain bearing with steel/steel, with -2RS lip seals on both sides, series G, DIN ISO 12240-1, maintenance required
Measurements
| d (Bore) | 25 mm |
|---|---|
| B (Width) | 28 mm |
| D | 47 mm |
| d₁ | 29.5 mm |
| dₖ | 40.7 mm |
| rs mm | 0.6 mm |
| r1s mm | 0.6 mm |
| α (Tilt) | 17 |
| Weight | 0.19 kg |
| C (Dynamic) | 62 kN |
| C₀ (Static) | 310 kN |
| Radial clearance | 50 - 100 |
| C | 18 mm |
Details
Special characteristics:
- For use with high and alternating loads and larger angles of tilt,
- Wider joint ball and larger outside diameter compared to DGE_ES-2RS series, to enable higher load ratings and larger tilt angle;
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.