DGEG-ES-2RS
DGEG 70 ES-2RS
Spherical-plain bearing with steel/steel, with -2RS lip seals on both sides, series G, DIN ISO 12240-1, maintenance required
Measurements
| d (Bore) | 70 mm |
|---|---|
| B (Width) | 70 mm |
| D | 120 mm |
| d₁ | 78.3 mm |
| dₖ | 105 mm |
| rs mm | 1 mm |
| r1s mm | 1 mm |
| α (Tilt) | 16 |
| Weight | 2.9 kg |
| C (Dynamic) | 400 kN |
| C₀ (Static) | 2000 kN |
| Radial clearance | 72 - 142 |
| C | 45 mm |
Details
Special characteristics:
- For use with high and alternating loads and larger angles of tilt,
- Wider joint ball and larger outside diameter compared to DGE_ES-2RS series, to enable higher load ratings and larger tilt angle;
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.