WLT NIRO VR
WLT 25 - 90 - 500
Spherical-plain bearings in stainless steel with roller bearing, full complement design
Measurements
| d (Bore) | 25 mm |
|---|---|
| B (Width) | 31 mm |
| D | 64 mm |
| d₁ | 30.1 mm |
| α (Tilt) | 5 |
| Weight | 0.38 kg |
| C (Dynamic) | 18.69 kN |
| C₀ (Static) | 14.35 kN |
| Radial clearance | 10 - 30 |
| C | 22 mm |
| n max | 400 rpm |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements. In contract to the cage design, the full complement design is suitable for higher loads but with a lower speed threshold.
- High loads,
- Low maintenance due to long-term lubrication with food-grade approval;
- Covering discs in stainless steel on both sides to prevent the penetration of coarse dirt particles inside the bearing.
VORBAL WLT-bearings with circular lubrication groove and lubrication input are available on request.
For appropriate use of this type it is absolutely mandatory that the lubrication input is not mounted in the direction of load! For shaft diameters from 10 mm to 30 mm.