DGIHN-K-LO
DGIHN-K 40 LO
Hydraulic-rod ends with pressed spherical plain bearing, female thread, with slot and clambing arrangement, according to DIN 24338, maintenance required
Measurements
| d (Bore) | 40 mm |
|---|---|
| d₂ (Head ø) | 90 mm |
| l₄ | 146 mm |
| Thread (g) | M 33 x 2 |
| B (Width) | 40 mm |
| C₁ | 33 mm |
| d₁ | 46 mm |
| d₄ | 47 mm |
| d5 mm | 80 mm |
| dₖ | 53 mm |
| h₁ | 97 mm |
| l₃ | 46 mm |
| l₇ | 41 mm |
| α (Tilt) | 4 |
| Weight | 2.1 kg |
| C (Dynamic) | 80 kN |
| C₀ (Static) | 163.2 kN |
| Radial clearance | 8 - 120 |
| c2 mm | 26 mm |
Details
Special characteristics:
- Used for alternating radial loads;
- Rod ends from size 16 can be greased subsequently by means of a conical grease nipple.
- Female thread with slot, clamping arrangement.
- Hydraulic rod ends are fixed as standard with maintenance required DGE_LO (with extended inner ring) radial-spherical-plain bearings and fixed with retaining rings.
For shaft diameters from 12 mm to 125 mm. Left-hand thread only on request.