DGIHN-K-LO
DGIHN-K 90 LO
Hydraulic-rod ends with pressed spherical plain bearing, female thread, with slot and clambing arrangement, according to DIN 24338, maintenance required
Measurements
| d (Bore) | 90 mm |
|---|---|
| d₂ (Head ø) | 185 mm |
| l₄ | 296 mm |
| Thread (g) | M 72 x 3 |
| B (Width) | 90 mm |
| C₁ | 72 mm |
| d₁ | 99 mm |
| d₄ | 100 mm |
| d5 mm | 160 mm |
| dₖ | 130 mm |
| h₁ | 195 mm |
| l₃ | 91 mm |
| l₇ | 85 mm |
| α (Tilt) | 4 |
| Weight | 17 kg |
| C (Dynamic) | 392 kN |
| C₀ (Static) | 600 kN |
| Radial clearance | 8 - 165 |
| c2 mm | 52 mm |
Details
Special characteristics:
- Used for alternating radial loads;
- Rod ends from size 16 can be greased subsequently by means of a conical grease nipple.
- Female thread with slot, clamping arrangement.
- Hydraulic rod ends are fixed as standard with maintenance required DGE_LO (with extended inner ring) radial-spherical-plain bearings and fixed with retaining rings.
For shaft diameters from 12 mm to 125 mm. Left-hand thread only on request.