DGIHN-K-LO
DGIHN-KL 50 LO
Hydraulic-rod ends with pressed spherical plain bearing, female thread, with slot and clambing arrangement, according to DIN 24338, maintenance required
Measurements
| d (Bore) | 50 mm |
|---|---|
| d₂ (Head ø) | 109 mm |
| l₄ | 179.5 mm |
| Thread (g) | M 42 x 2 |
| B (Width) | 50 mm |
| C₁ | 41 mm |
| d₁ | 57 mm |
| d₄ | 58 mm |
| d5 mm | 96 mm |
| dₖ | 66 mm |
| h₁ | 120 mm |
| l₃ | 57 mm |
| l₇ | 50 mm |
| α (Tilt) | 4 |
| Weight | 4.4 kg |
| C (Dynamic) | 124.8 kN |
| C₀ (Static) | 248 kN |
| Radial clearance | 8 - 120 |
| c2 mm | 32 mm |
Details
Special characteristics:
- Used for alternating radial loads;
- Rod ends from size 16 can be greased subsequently by means of a conical grease nipple.
- Female thread with slot, clamping arrangement.
- Hydraulic rod ends are fixed as standard with maintenance required DGE_LO (with extended inner ring) radial-spherical-plain bearings and fixed with retaining rings.
For shaft diameters from 12 mm to 125 mm. Left-hand thread only on request.