BEMN
BEMN 06 - 20 - 501
Rod ends with pressed spherical-plain bearing, male thread, series K, DIN ISO 12240-4, maintenance required
Measurements
| d (Bore) | 6 mm |
|---|---|
| d₂ (Head ø) | 20 mm |
| Thread (g) | M 6 |
| B (Width) | 9 mm |
| C₁ | 6.75 mm |
| d₁ | 8.9 mm |
| dₖ | 12.65 mm |
| h | 36 mm |
| l₁ | 22 mm |
| l₂ | 46 mm |
| l₇ | 12 mm |
| α (Tilt) | 13 |
| Weight | 0.02 kg |
| C (Dynamic) | 3 kN |
| C₀ (Static) | 7.5 kN |
| Radial clearance | 20 - 60 |
Details
Special characteristics:
- Primary application in situations of alternating stresses or impact loads and preferred in situations of large swivelling movements;
- Joint ball made of ball bearing steel, hardened, ground, polished and hard chromium plated, ensures a reliable corrosion protection.
- Rod ends are pressed as standard with DG_PB radial-spherical-plain bearing.
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Rod ends from size 6-30 can be greased subsequently by means of a funnel-type lubrication nipple. Further special grease nipples available on request.