BEMN
BEMN 08 - 20 - 502
Rod ends with pressed spherical-plain bearing, male thread, series K, DIN ISO 12240-4, maintenance required
Measurements
| d (Bore) | 8 mm |
|---|---|
| d₂ (Head ø) | 24 mm |
| Thread (g) | M 8 |
| B (Width) | 12 mm |
| C₁ | 9 mm |
| d₁ | 10.3 mm |
| dₖ | 15.82 mm |
| h | 42 mm |
| l₁ | 25 mm |
| l₂ | 54 mm |
| l₇ | 15 mm |
| α (Tilt) | 13 |
| Weight | 0.03 kg |
| C (Dynamic) | 4.8 kN |
| C₀ (Static) | 11.9 kN |
| Radial clearance | 20 - 60 |
Details
Special characteristics:
- Primary application in situations of alternating stresses or impact loads and preferred in situations of large swivelling movements;
- Joint ball made of ball bearing steel, hardened, ground, polished and hard chromium plated, ensures a reliable corrosion protection.
- Rod ends are pressed as standard with DG_PB radial-spherical-plain bearing.
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Rod ends from size 6-30 can be greased subsequently by means of a funnel-type lubrication nipple. Further special grease nipples available on request.