EMN -2RS
EMN 45 - 31 - 501
Rod ends with pressed spherical-plain bearing, with -2RS lip seals on both sides, male thread, series E/EH, DIN ISO 12240-4, maintenance required
Measurements
| d (Bore) | 45 mm |
|---|---|
| d₂ (Head ø) | 102 mm |
| Thread (g) | M 42 x 3 |
| B (Width) | 32 mm |
| C₁ | 25 mm |
| d₁ | 50 mm |
| dₖ | 60 mm |
| h | 163 mm |
| l₁ | 98 mm |
| l₂ | 214 mm |
| l₇ | 50 mm |
| α (Tilt) | 7 |
| Weight | 2.5 kg |
| C (Dynamic) | 107 kN |
| C₀ (Static) | 240 kN |
| Radial clearance | 40 - 120 |
Details
Special characteristics:
- Primary application in situations of alternating stresses or impact loads and preferred in situations of large swivelling movements;
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_ES-2RS radial-spherical-plain bearing.
- Rod ends from size 15 can be greased subsequently by means of a funnel-type lubrication nipple, and from size 20 by means of a conical grease nipple. Further special grease nipples available on request;
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.