EMN -2RS
EMN 50 - 30 - 502
Rod ends with pressed spherical-plain bearing, with -2RS lip seals on both sides, male thread, series E/EH, DIN ISO 12240-4, maintenance required
Measurements
| d (Bore) | 50 mm |
|---|---|
| d₂ (Head ø) | 112 mm |
| Thread (g) | M 52 x 3 |
| B (Width) | 35 mm |
| C₁ | 28 mm |
| d₁ | 55 mm |
| dₖ | 66 mm |
| h | 195 mm |
| l₁ | 120 mm |
| l₂ | 251 mm |
| l₇ | 60 mm |
| α (Tilt) | 6 |
| Weight | 3.4 kg |
| C (Dynamic) | 132 kN |
| C₀ (Static) | 290 kN |
| Radial clearance | 40 - 120 |
Details
Special characteristics:
- Primary application in situations of alternating stresses or impact loads and preferred in situations of large swivelling movements;
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Rod ends are pressed as standard with DGE_ES-2RS radial-spherical-plain bearing.
- Rod ends from size 15 can be greased subsequently by means of a funnel-type lubrication nipple, and from size 20 by means of a conical grease nipple. Further special grease nipples available on request;
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.