BRF Zoll
BRF 1/1 - 01 - 502
Rod ends with ball bearing, female thread, dimensions in inches, low maintenance, lubrication possible
Measurements
| Thread (g) | 1/1 - 14 UNS |
|---|---|
| d (Bore) | 1.000" |
| d₂ (Head ø) | 2.519" |
| l₄ | 4.98" |
| B (Width) | 1.22" |
| C₁ | 0.866" |
| d₁ | 1.161" |
| d₃ | 1.171" |
| d₄ | 1.377" |
| l₅ | 0.236" |
| h₁ | 3.72" |
| l₃ | 1.653" |
| l₇ | 1.279" |
| α (Tilt) | 5 |
| Weight | 0.57 kg |
| C (Dynamic) | 11 kN |
| C₀ (Static) | 5.7 kN |
| Radial clearance | 10 - 30 |
| n max | 600 rpm |
| W (A/F) | 1.181" |
| Y (Axial) | 2.02 |
| Y₀ (Axial) | 2.12 |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- Low bearing friction,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be subsequently lubricated by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.
Available as a complete system solution or separately with hexagonal locking nuts, inch threads. For shaft diameters from 1/4" to 1/1".