BRF Zoll
BRF 1/2 - 00 - 501
Rod ends with ball bearing, female thread, dimensions in inches, low maintenance, lubrication possible
Measurements
| Thread (g) | 1/2 - 20 UNF |
|---|---|
| d (Bore) | 0.5" |
| d₂ (Head ø) | 1.311" |
| l₄ | 2.801" |
| B (Width) | 0.624" |
| C₁ | 0.472" |
| d₁ | 0.574" |
| d₃ | 0.748" |
| d₄ | 0.874" |
| l₅ | 0.279" |
| h₁ | 2.145" |
| l₃ | 1.102" |
| l₇ | 0.649" |
| α (Tilt) | 7.5 |
| Weight | 0.127 kg |
| C (Dynamic) | 4.9 kN |
| C₀ (Static) | 1.9 kN |
| Radial clearance | 10 - 30 |
| n max | 1125 rpm |
| W (A/F) | 0.757" |
| Y (Axial) | 1.74 |
| Y₀ (Axial) | 1.82 |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- Low bearing friction,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be subsequently lubricated by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.
Available as a complete system solution or separately with hexagonal locking nuts, inch threads. For shaft diameters from 1/4" to 1/1".