BRTM NIRO
BRTM 16 - 60 - 502
Rod ends in stainless steel with roller bearing, cage design, male thread, series K, DIN ISO 12240-4, low maintenance, lubrication possible
Measurements
| d (Bore) | 16 mm |
|---|---|
| d₂ (Head ø) | 42 mm |
| Thread (g) | M 16 |
| B (Width) | 21 mm |
| C₁ | 15 mm |
| d₁ | 19 mm |
| h | 66 mm |
| l₁ | 40 mm |
| l₂ | 87 mm |
| l₇ | 22 mm |
| α (Tilt) | 7 |
| Weight | 0.185 kg |
| C (Dynamic) | 9.31 kN |
| C₀ (Static) | 6.23 kN |
| Radial clearance | 10 - 30 |
| n max | 975 rpm |
| Torque | 80 |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- High loads,
- Mainly all rod end housings are made of forged stainless steel, extremly high loads resistant and surface electropolished which ensures you a very high corrosion resistance.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs in stainless steel on both sides to prevent the penetration of coarse dirt particles inside the bearing.