BRTM NIRO
BRTM 20 - 60 - 501
Rod ends in stainless steel with roller bearing, cage design, male thread, series K, DIN ISO 12240-4, low maintenance, lubrication possible
Measurements
| d (Bore) | 20 mm |
|---|---|
| d₂ (Head ø) | 50 mm |
| Thread (g) | M 20 x 1,5 |
| B (Width) | 25 mm |
| C₁ | 18 mm |
| d₁ | 24.3 mm |
| h | 78 mm |
| l₁ | 47 mm |
| l₂ | 103 mm |
| l₇ | 28 mm |
| α (Tilt) | 7 |
| Weight | 0.34 kg |
| C (Dynamic) | 11.9 kN |
| C₀ (Static) | 8.19 kN |
| Radial clearance | 10 - 30 |
| n max | 825 rpm |
| Torque | 200 |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- High loads,
- Mainly all rod end housings are made of forged stainless steel, extremly high loads resistant and surface electropolished which ensures you a very high corrosion resistance.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs in stainless steel on both sides to prevent the penetration of coarse dirt particles inside the bearing.