PM
PM 12 - 00 - 502
Rod ends with ball bearing, male thread, low maintenance, lubrication possible
Measurements
| d (Bore) | 12 mm |
|---|---|
| d₂ (Head ø) | 40 mm |
| Thread (g) | M 16 x 1,5 |
| B (Width) | 20 mm |
| C₁ | 14 mm |
| d₁ | 15 mm |
| d₃ | 21 mm |
| h | 90 mm |
| l₁ | 53.5 mm |
| l₂ | 113 mm |
| l₇ | 31 mm |
| α (Tilt) | 7.5 |
| Weight | 0.226 kg |
| C (Dynamic) | 5.4 kN |
| C₀ (Static) | 2.1 kN |
| Radial clearance | 10 - 30 |
| n max | 1050 rpm |
| Y (Axial) | 1.81 |
| Y₀ (Axial) | 1.9 |
| e mm | 3 mm |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- Low bearing friction,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends can be greased subsequently by means of a funnel-type lubrication nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.
- In standard length with designation PM _-00-501/-502. In shorter form with designation PM _-01-501/-502.