DGE-FW-2RS
DGE 50 FW-2RS
DGE 50 FW-2RS
Spherical-plain bearing with steel/PTFE, with -2RS lip seals on both sides, series G, DIN ISO 12240-1, maintenance free
Measurements
| d (Bore) | 50 mm |
|---|---|
| B (Width) | 56 mm |
| D | 90 mm |
| d₁ | 57.1 mm |
| dₖ | 80 mm |
| rs mm | 0.6 mm |
| α (Tilt) | 17 |
| Weight | 1.4 kg |
| C (Dynamic) | 690 kN |
| C₀ (Static) | 1150 kN |
| Radial clearance | 0 - 60 |
| C | 36 mm |
| rs1 mm | 1 mm |
Details
Special characteristics:
- Suitable for use with high unidirectional loads;
- Sliding combination: steel with bonded PTFE fabric;
- Wider joint ball and larger outside diameter compared to DGE_UK-2RS series, to enable higher load ratings and larger tilt angle;
- -2RS lip seals on both sides prevent the penetration of coarse dirt particles inside the bearing.