BEMN
BEMN 20 - 20 - 501
Rod ends with pressed spherical-plain bearing, male thread, series K, DIN ISO 12240-4, maintenance required
Measurements
| d (Bore) | 20 mm |
|---|---|
| d₂ (Head ø) | 50 mm |
| Thread (g) | M 20 x 1,5 |
| B (Width) | 25 mm |
| C₁ | 18 mm |
| d₁ | 24.3 mm |
| dₖ | 34.87 mm |
| h | 78 mm |
| l₁ | 47 mm |
| l₂ | 103 mm |
| l₇ | 28 mm |
| α (Tilt) | 15 |
| Weight | 0.38 kg |
| C (Dynamic) | 20 kN |
| C₀ (Static) | 50 kN |
| Radial clearance | 50 - 110 |
Details
Special characteristics:
- Primary application in situations of alternating stresses or impact loads and preferred in situations of large swivelling movements;
- Joint ball made of ball bearing steel, hardened, ground, polished and hard chromium plated, ensures a reliable corrosion protection.
- Rod ends are pressed as standard with DG_PB radial-spherical-plain bearing.
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Rod ends from size 6-30 can be greased subsequently by means of a funnel-type lubrication nipple. Further special grease nipples available on request.