BRF Zoll
BRF 1/4 - 00 - 502
Rod ends with ball bearing, female thread, dimensions in inches, low maintenance, lubrication possible
Measurements
| Thread (g) | 1/4 - 28 UNF |
|---|---|
| d (Bore) | 0.25" |
| d₂ (Head ø) | 0.787" |
| l₄ | 1.593" |
| B (Width) | 0.354" |
| C₁ | 0.265" |
| d₁ | 0.356" |
| d₃ | 0.393" |
| d₄ | 0.511" |
| l₅ | 0.24" |
| h₁ | 1.2" |
| l₃ | 0.472" |
| l₇ | 0.452" |
| α (Tilt) | 8 |
| Weight | 0.027 kg |
| C (Dynamic) | 2.7 kN |
| C₀ (Static) | 0.7 kN |
| Radial clearance | 10 - 30 |
| n max | 1350 rpm |
| W (A/F) | 0.433" |
| Y (Axial) | 2.09 |
| Y₀ (Axial) | 2.19 |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- Low bearing friction,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be subsequently lubricated by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.
Available as a complete system solution or separately with hexagonal locking nuts, inch threads. For shaft diameters from 1/4" to 1/1".