BRF Zoll
BRF 3/4 - 00 - 502
Rod ends with ball bearing, female thread, dimensions in inches, low maintenance, lubrication possible
Measurements
| Thread (g) | 3/4 - 16 UNF |
|---|---|
| d (Bore) | 0.75" |
| d₂ (Head ø) | 1.75" |
| l₄ | 3.926" |
| B (Width) | 0.984" |
| C₁ | 0.688" |
| d₁ | 0.956" |
| d₃ | 1.000" |
| d₄ | 1.125" |
| l₅ | 0.409" |
| h₁ | 3.051" |
| l₃ | 1.299" |
| l₇ | 1.043" |
| α (Tilt) | 7 |
| Weight | 0.39 kg |
| C (Dynamic) | 7.8 kN |
| C₀ (Static) | 3.4 kN |
| Radial clearance | 10 - 30 |
| n max | 825 rpm |
| W (A/F) | 1.007" |
| Y (Axial) | 2.32 |
| Y₀ (Axial) | 2.43 |
Details
Special characteristics:
- For high speeds, wide swivelling angles or rotating movements,
- Low bearing friction,
- All rod end housings are made of forged steel, tempered, extremly high loads resistant and protected against corrosion by galvanisation.
- Low maintenance due to long-term lubrication with food-grade approval; the rod ends may be subsequently lubricated by means of a funnel or conical grease nipple. Further special grease nipples available on request;
- Covering discs on both sides to prevent the penetration of coarse dirt particles inside the bearing.
Available as a complete system solution or separately with hexagonal locking nuts, inch threads. For shaft diameters from 1/4" to 1/1".